Struct nix::fcntl::OFlag [−]
pub struct OFlag { /* fields omitted */ }Configuration options for opened files.
Methods
impl OFlag
impl OFlagpub const O_ACCMODE: OFlag
O_ACCMODE: OFlag = OFlag{bits: libc::O_ACCMODE,}
Mask for the access mode of the file.
pub const O_APPEND: OFlag
O_APPEND: OFlag = OFlag{bits: libc::O_APPEND,}
Open the file in append-only mode.
pub const O_ASYNC: OFlag
O_ASYNC: OFlag = OFlag{bits: libc::O_ASYNC,}
Generate a signal when input or output becomes possible.
pub const O_CLOEXEC: OFlag
O_CLOEXEC: OFlag = OFlag{bits: libc::O_CLOEXEC,}
Closes the file descriptor once an execve call is made.
Also sets the file offset to the beginning of the file.
pub const O_CREAT: OFlag
O_CREAT: OFlag = OFlag{bits: libc::O_CREAT,}
Create the file if it does not exist.
pub const O_DIRECT: OFlag
O_DIRECT: OFlag = OFlag{bits: libc::O_DIRECT,}
Try to minimize cache effects of the I/O for this file.
pub const O_DIRECTORY: OFlag
O_DIRECTORY: OFlag = OFlag{bits: libc::O_DIRECTORY,}
If the specified path isn't a directory, fail.
pub const O_DSYNC: OFlag
O_DSYNC: OFlag = OFlag{bits: libc::O_DSYNC,}
Implicitly follow each write() with an fdatasync().
pub const O_EXCL: OFlag
O_EXCL: OFlag = OFlag{bits: libc::O_EXCL,}
Error out if a file was not created.
pub const O_FSYNC: OFlag
O_FSYNC: OFlag = OFlag{bits: libc::O_FSYNC,}
Same as O_SYNC.
pub const O_LARGEFILE: OFlag
O_LARGEFILE: OFlag = OFlag{bits: libc::O_LARGEFILE,}
Allow files whose sizes can't be represented in an off_t to be opened.
pub const O_NOATIME: OFlag
O_NOATIME: OFlag = OFlag{bits: libc::O_NOATIME,}
Do not update the file last access time during read(2)s.
pub const O_NOCTTY: OFlag
O_NOCTTY: OFlag = OFlag{bits: libc::O_NOCTTY,}
Don't attach the device as the process' controlling terminal.
pub const O_NDELAY: OFlag
O_NDELAY: OFlag = OFlag{bits: libc::O_NDELAY,}
Same as O_NONBLOCK.
pub const O_NOFOLLOW: OFlag
O_NOFOLLOW: OFlag = OFlag{bits: libc::O_NOFOLLOW,}
open() will fail if the given path is a symbolic link.
pub const O_NONBLOCK: OFlag
O_NONBLOCK: OFlag = OFlag{bits: libc::O_NONBLOCK,}
When possible, open the file in nonblocking mode.
pub const O_PATH: OFlag
O_PATH: OFlag = OFlag{bits: libc::O_PATH,}
Obtain a file descriptor for low-level access.
The file itself is not opened and other file operations will fail.
pub const O_RDONLY: OFlag
O_RDONLY: OFlag = OFlag{bits: libc::O_RDONLY,}
Only allow reading.
This should not be combined with O_WRONLY or O_RDWR.
pub const O_RDWR: OFlag
O_RDWR: OFlag = OFlag{bits: libc::O_RDWR,}
Allow both reading and writing.
This should not be combined with O_WRONLY or O_RDWR.
pub const O_RSYNC: OFlag
O_RSYNC: OFlag = OFlag{bits: libc::O_RSYNC,}
Similar to O_DSYNC but applies to reads instead.
pub const O_SYNC: OFlag
O_SYNC: OFlag = OFlag{bits: libc::O_SYNC,}
Implicitly follow each write() with an fsync().
pub const O_TMPFILE: OFlag
O_TMPFILE: OFlag = OFlag{bits: libc::O_TMPFILE,}
Create an unnamed temporary file.
pub const O_TRUNC: OFlag
O_TRUNC: OFlag = OFlag{bits: libc::O_TRUNC,}
Truncate an existing regular file to 0 length if it allows writing.
pub const O_WRONLY: OFlag
O_WRONLY: OFlag = OFlag{bits: libc::O_WRONLY,}
Only allow writing.
This should not be combined with O_RDONLY or O_RDWR.
pub fn empty() -> OFlag
pub fn empty() -> OFlagReturns an empty set of flags.
pub fn all() -> OFlag
pub fn all() -> OFlagReturns the set containing all flags.
pub fn bits(&self) -> c_int
pub fn bits(&self) -> c_intReturns the raw value of the flags currently stored.
pub fn from_bits(bits: c_int) -> Option<OFlag>
pub fn from_bits(bits: c_int) -> Option<OFlag>Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: c_int) -> OFlag
pub fn from_bits_truncate(bits: c_int) -> OFlagConvert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
pub fn is_empty(&self) -> boolReturns true if no flags are currently stored.
pub fn is_all(&self) -> bool
pub fn is_all(&self) -> boolReturns true if all flags are currently set.
pub fn intersects(&self, other: OFlag) -> bool
pub fn intersects(&self, other: OFlag) -> boolReturns true if there are flags common to both self and other.
pub fn contains(&self, other: OFlag) -> bool
pub fn contains(&self, other: OFlag) -> boolReturns true all of the flags in other are contained within self.
pub fn insert(&mut self, other: OFlag)
pub fn insert(&mut self, other: OFlag)Inserts the specified flags in-place.
pub fn remove(&mut self, other: OFlag)
pub fn remove(&mut self, other: OFlag)Removes the specified flags in-place.
pub fn toggle(&mut self, other: OFlag)
pub fn toggle(&mut self, other: OFlag)Toggles the specified flags in-place.
pub fn set(&mut self, other: OFlag, value: bool)
pub fn set(&mut self, other: OFlag, value: bool)Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Copy for OFlag
impl Copy for OFlagimpl PartialEq for OFlag
impl PartialEq for OFlagfn eq(&self, other: &OFlag) -> bool
fn eq(&self, other: &OFlag) -> boolThis method tests for self and other values to be equal, and is used by ==. Read more
fn ne(&self, other: &OFlag) -> bool
fn ne(&self, other: &OFlag) -> boolThis method tests for !=.
impl Eq for OFlag
impl Eq for OFlagimpl Clone for OFlag
impl Clone for OFlagfn clone(&self) -> OFlag
fn clone(&self) -> OFlagReturns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)1.0.0[src]
fn clone_from(&mut self, source: &Self)Performs copy-assignment from source. Read more
impl PartialOrd for OFlag
impl PartialOrd for OFlagfn partial_cmp(&self, other: &OFlag) -> Option<Ordering>
fn partial_cmp(&self, other: &OFlag) -> Option<Ordering>This method returns an ordering between self and other values if one exists. Read more
fn lt(&self, other: &OFlag) -> bool
fn lt(&self, other: &OFlag) -> boolThis method tests less than (for self and other) and is used by the < operator. Read more
fn le(&self, other: &OFlag) -> bool
fn le(&self, other: &OFlag) -> boolThis method tests less than or equal to (for self and other) and is used by the <= operator. Read more
fn gt(&self, other: &OFlag) -> bool
fn gt(&self, other: &OFlag) -> boolThis method tests greater than (for self and other) and is used by the > operator. Read more
fn ge(&self, other: &OFlag) -> bool
fn ge(&self, other: &OFlag) -> boolThis method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
impl Ord for OFlag
impl Ord for OFlagfn cmp(&self, other: &OFlag) -> Ordering
fn cmp(&self, other: &OFlag) -> OrderingThis method returns an Ordering between self and other. Read more
fn max(self, other: Self) -> Self1.21.0[src]
fn max(self, other: Self) -> SelfCompares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self1.21.0[src]
fn min(self, other: Self) -> SelfCompares and returns the minimum of two values. Read more
impl Hash for OFlag
impl Hash for OFlagfn hash<__H: Hasher>(&self, state: &mut __H)
fn hash<__H: Hasher>(&self, state: &mut __H)Feeds this value into the given [Hasher]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher, 1.3.0[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher, Feeds a slice of this type into the given [Hasher]. Read more
impl Debug for OFlag
impl Debug for OFlagimpl Binary for OFlag
impl Binary for OFlagimpl Octal for OFlag
impl Octal for OFlagimpl LowerHex for OFlag
impl LowerHex for OFlagimpl UpperHex for OFlag
impl UpperHex for OFlagimpl BitOr for OFlag
impl BitOr for OFlagtype Output = OFlag
The resulting type after applying the | operator.
fn bitor(self, other: OFlag) -> OFlag
fn bitor(self, other: OFlag) -> OFlagReturns the union of the two sets of flags.
impl BitOrAssign for OFlag
impl BitOrAssign for OFlagfn bitor_assign(&mut self, other: OFlag)
fn bitor_assign(&mut self, other: OFlag)Adds the set of flags.
impl BitXor for OFlag
impl BitXor for OFlagtype Output = OFlag
The resulting type after applying the ^ operator.
fn bitxor(self, other: OFlag) -> OFlag
fn bitxor(self, other: OFlag) -> OFlagReturns the left flags, but with all the right flags toggled.
impl BitXorAssign for OFlag
impl BitXorAssign for OFlagfn bitxor_assign(&mut self, other: OFlag)
fn bitxor_assign(&mut self, other: OFlag)Toggles the set of flags.
impl BitAnd for OFlag
impl BitAnd for OFlagtype Output = OFlag
The resulting type after applying the & operator.
fn bitand(self, other: OFlag) -> OFlag
fn bitand(self, other: OFlag) -> OFlagReturns the intersection between the two sets of flags.
impl BitAndAssign for OFlag
impl BitAndAssign for OFlagfn bitand_assign(&mut self, other: OFlag)
fn bitand_assign(&mut self, other: OFlag)Disables all flags disabled in the set.
impl Sub for OFlag
impl Sub for OFlagtype Output = OFlag
The resulting type after applying the - operator.
fn sub(self, other: OFlag) -> OFlag
fn sub(self, other: OFlag) -> OFlagReturns the set difference of the two sets of flags.
impl SubAssign for OFlag
impl SubAssign for OFlagfn sub_assign(&mut self, other: OFlag)
fn sub_assign(&mut self, other: OFlag)Disables all flags enabled in the set.
impl Not for OFlag
impl Not for OFlagtype Output = OFlag
The resulting type after applying the ! operator.
fn not(self) -> OFlag
fn not(self) -> OFlagReturns the complement of this set of flags.
impl Extend<OFlag> for OFlag
impl Extend<OFlag> for OFlagfn extend<T: IntoIterator<Item = OFlag>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = OFlag>>(&mut self, iterator: T)Extends a collection with the contents of an iterator. Read more
impl FromIterator<OFlag> for OFlag
impl FromIterator<OFlag> for OFlagfn from_iter<T: IntoIterator<Item = OFlag>>(iterator: T) -> OFlag
fn from_iter<T: IntoIterator<Item = OFlag>>(iterator: T) -> OFlagCreates a value from an iterator. Read more