lesavka/docs/operational-env.md

Lesavka operational environment variables

This is the tracked inventory for LESAVKA_* knobs used by source, scripts, CI, and tests. The hygiene gate fails when a new variable is added without appearing here, which keeps operator-facing configuration from drifting into folklore.

Hardware-facing assumptions belong near the code that uses them; this file is the repo-wide index.

Install security flow: the server installer creates /etc/lesavka/lesavka-client-pki.tar.gz and makes it readable only by the installing account. The client installer first uses LESAVKA_CLIENT_PKI_BUNDLE when supplied, otherwise it tries to fetch that same bundle from LESAVKA_CLIENT_PKI_SSH_SOURCE over SSH. Runtime clients require the installed ca.crt, client.crt, and client.key for HTTPS/mTLS relay connections.

| LESAVKA_ALLOW_GADGET_CYCLE | document near use before promoting to operator config | | LESAVKA_ALLOW_GADGET_RESET | permits installer/recovery flows to reset the USB gadget when a hard rebuild is otherwise required; by itself it must not force a live attached-host reset | | LESAVKA_ALLOW_INSECURE | client transport override; permits non-local http:// relay URLs only for lab/debug use | | LESAVKA_ALSA_DEV | server hardware/device override | | LESAVKA_ATTACH_WRITE_UDC | server hardware/device override | | LESAVKA_AUDIO_AUTO_RECOVER_AFTER | client media capture/playback override | | LESAVKA_AUDIO_AUTO_RECOVER_COOLDOWN_MS | client media capture/playback override | | LESAVKA_AUDIO_AUTO_RECOVER_USB | client media capture/playback override | | LESAVKA_AUDIO_DISABLE | client media capture/playback override | | LESAVKA_AUDIO_GAIN | client media capture/playback override | | LESAVKA_AUDIO_GAIN_CONTROL | client media capture/playback override | | LESAVKA_AUDIO_FAIL_ON_IDLE | server remote-speaker capture debug guardrail; default keeps idle UAC streams open | | LESAVKA_AUDIO_INIT_ATTEMPTS | client media capture/playback override | | LESAVKA_AUDIO_INIT_DELAY_MS | client media capture/playback override | | LESAVKA_AUDIO_MIN_PACKETS_PER_SEC | server remote-speaker capture debug guardrail; unset disables packet-rate hard failures | | LESAVKA_AUDIO_SINK | client media capture/playback override | | LESAVKA_AUDIO_SOURCE_GRACE_MS | server remote-speaker capture startup grace before optional watchdog checks | | LESAVKA_AUDIO_SOURCE_IDLE_MS | server remote-speaker capture idle window used only when idle hard-fail is enabled | | LESAVKA_BOOL_TEST | test/build contract variable; not runtime operator config | | LESAVKA_BREAKOUT_PREVIEW_HEIGHT | eye preview/video transport override | | LESAVKA_BREAKOUT_PREVIEW_MAX_KBIT | eye preview/video transport override | | LESAVKA_BREAKOUT_PREVIEW_WIDTH | eye preview/video transport override | | LESAVKA_BREAKOUT_REQUEST_FPS | eye preview/video transport override | | LESAVKA_BREAKOUT_REQUEST_HEIGHT | eye preview/video transport override | | LESAVKA_BREAKOUT_REQUEST_WIDTH | eye preview/video transport override | | LESAVKA_CAM_ALLOW_PROFILE_OVERRIDE | lab-only override that lets launcher camera width/height/fps env values beat the server-negotiated UVC profile | | LESAVKA_CAM_BY_ID_DIR | client media capture/playback override | | LESAVKA_CAM_CODEC | client media capture/playback override | | LESAVKA_CAM_DEV_ROOT | client media capture/playback override | | LESAVKA_CAM_DISABLE | client media capture/playback override | | LESAVKA_CAM_FORMAT | client media capture/playback override | | LESAVKA_CAM_FPS | client media capture/playback override | | LESAVKA_CAM_H264_KBIT | client media capture/playback override | | LESAVKA_CAM_HEIGHT | client media capture/playback override | | LESAVKA_CAM_JPEG_QUALITY | client media capture/playback override | | LESAVKA_CAM_KEYFRAME_INTERVAL | client media capture/playback override | | LESAVKA_CAM_MJPG | client media capture/playback override | | LESAVKA_CAM_OUTPUT | client media capture/playback override | | LESAVKA_CAM_SOURCE | client media capture/playback override | | LESAVKA_CAM_TEST_ENCODER | client media capture/playback override | | LESAVKA_CAM_TEST_PATTERN | client media capture/playback override | | LESAVKA_CAM_WIDTH | client media capture/playback override | | LESAVKA_CALIBRATION_PATH | server upstream A/V calibration storage path override | | LESAVKA_CAPTURE_POWER_GRACE_SECS | runtime/install/session override | | LESAVKA_CAPTURE_POWER_UNIT | runtime/install/session override | | LESAVKA_CAPTURE_REMOTE | runtime/install/session override | | LESAVKA_CLOCK_ALIGNMENT_SAMPLES | manual direct UVC/UAC probe freshness trust gate; number of server-to-capture persistent SSH midpoint clock samples, using the lowest-uncertainty sample, defaults to 5 | | LESAVKA_CLIENT_APP_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_BUNDLE | server installer output path for the generated client TLS enrollment bundle | | LESAVKA_CLIENT_CAPTURE_DIR | client installer capture folder override; defaults to ~/Pictures/lesavka | | LESAVKA_CLIENT_CAMERA_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_INPUTS_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_KEYBOARD_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_MAIN_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_MICROPHONE_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_MOUSE_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_OUTPUT_AUDIO_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_OUTPUT_DISPLAY_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_OUTPUT_VIDEO_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_PKI_BUNDLE | client installer input path for a server-generated TLS enrollment bundle | | LESAVKA_CLIENT_PKI_AUTO_FETCH | client installer toggle for SSH enrollment auto-fetch; defaults to enabled | | LESAVKA_CLIENT_PKI_DIR | client installer/runtime TLS identity directory override | | LESAVKA_CLIENT_PKI_SSH_SOURCE | client installer SSH source for auto-fetching the server enrollment bundle; defaults to theia:/etc/lesavka/lesavka-client-pki.tar.gz | | LESAVKA_CLIENT_RELAYCTL_BIN_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIENT_VIDEO_SUPPORT_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CLIPBOARD_CHORD | input routing/clipboard override | | LESAVKA_CLIPBOARD_CMD | input routing/clipboard override | | LESAVKA_CLIPBOARD_DEBOUNCE_MS | input routing/clipboard override | | LESAVKA_CLIPBOARD_DELAY_MS | input routing/clipboard override | | LESAVKA_CLIPBOARD_MAX | input routing/clipboard override | | LESAVKA_CLIPBOARD_PASTE | input routing/clipboard override | | LESAVKA_CLIPBOARD_TIMEOUT_MS | input routing/clipboard override | | LESAVKA_COMMON_CLI_BIN_SRC | test/build contract variable; not runtime operator config | | LESAVKA_CORE_HELPER | runtime/install/session override | | LESAVKA_DECODER_PROBE_BUFFERS | manual probe override | | LESAVKA_DECODER_PROBE_POLL_SECONDS | manual probe override | | LESAVKA_DECODER_PROBE_WAIT_SECONDS | manual probe override | | LESAVKA_DETACH_CLEAR_UDC | server hardware/device override | | LESAVKA_DEV_MODE | document near use before promoting to operator config | | LESAVKA_DISABLE_UAC | document near use before promoting to operator config | | LESAVKA_DISABLE_UVC | document near use before promoting to operator config | | LESAVKA_DISABLE_VIDEO_RENDER | eye preview/video transport override | | LESAVKA_DUMP_VIDEO | eye preview/video transport override | | LESAVKA_EYE_ADAPTIVE | eye preview/video transport override | | LESAVKA_EYE_APPSINK_BUFFERS | eye preview/video transport override | | LESAVKA_EYE_CAP_POLL_SECONDS | eye preview/video transport override | | LESAVKA_EYE_CAP_WAIT_SECONDS | eye preview/video transport override | | LESAVKA_EYE_CHAN_CAPACITY | eye preview/video transport override | | LESAVKA_EYE_DEVICE_POLL_MS | eye preview/video transport override | | LESAVKA_EYE_DEVICE_WAIT_MS | eye preview/video transport override | | LESAVKA_EYE_FPS | eye preview/video transport override | | LESAVKA_EYE_KEYFRAME_INTERVAL | eye preview/video transport override | | LESAVKA_EYE_MIN_FPS | eye preview/video transport override | | LESAVKA_EYE_QUEUE_BUFFERS | eye preview/video transport override | | LESAVKA_EYE_TESTSRC_KBIT | eye preview/video transport override | | LESAVKA_FAKE_SYSTEMCTL_MODE | test/build contract variable; not runtime operator config | | LESAVKA_FOCUS_LAUNCHER_ON_LOCAL | launcher UI/runtime override | | LESAVKA_FORCE_CORE_REBUILD_WITHOUT_UDC | document near use before promoting to operator config | | LESAVKA_FORCE_GADGET_REBUILD | explicit maintenance-window override for hard UDC detach/rebind during server install; pair with LESAVKA_ALLOW_GADGET_RESET=1 only when a live gadget rebuild is intentional | | LESAVKA_GADGET_CONFIGFS_ROOT | server hardware/device override | | LESAVKA_GADGET_FORCE_CYCLE | server hardware/device override | | LESAVKA_GADGET_SYSFS_ROOT | server hardware/device override | | LESAVKA_GIT_SHA | runtime/install/session override | | LESAVKA_H264_DECODER | eye preview/video transport override | | LESAVKA_HDMI_CONNECTOR | server hardware/device override | | LESAVKA_HDMI_DRIVER | server hardware/device override | | LESAVKA_HDMI_FBDEV | server hardware/device override | | LESAVKA_HDMI_PRESENTATION_DELAY_US | server HDMI video latency override | | LESAVKA_HDMI_HEIGHT | server hardware/device override | | LESAVKA_HDMI_MODES | server hardware/device override | | LESAVKA_HDMI_RESTORE_CRTC | server hardware/device override | | LESAVKA_HDMI_SINK | server hardware/device override | | LESAVKA_HDMI_SKIP_VSYNC | server hardware/device override | | LESAVKA_HDMI_WIDTH | server hardware/device override | | LESAVKA_HEADLESS | runtime/install/session override | | LESAVKA_HELPER_ENV_DUMP | document near use before promoting to operator config | | LESAVKA_HID_DIR | server hardware/device override | | LESAVKA_HID_WRITE_RETRIES | server hardware/device override | | LESAVKA_HID_WRITE_RETRY_DELAY_MS | server hardware/device override | | LESAVKA_HW_H264 | document near use before promoting to operator config | | LESAVKA_ICON_NAME | launcher UI/runtime override | | LESAVKA_ICON_SEARCH_PATH | launcher UI/runtime override | | LESAVKA_INPUT_RELEASE_TIMEOUT_MS | input routing/clipboard override | | LESAVKA_INPUT_REMOTE_FAILSAFE_MS | input routing/clipboard override | | LESAVKA_INPUT_REMOTE_FAILSAFE_SECS | input routing/clipboard override | | LESAVKA_INPUT_RESCAN_MS | input routing/clipboard override | | LESAVKA_INPUT_TOGGLE_DEBOUNCE_MS | input routing/clipboard override | | LESAVKA_INPUT_TOGGLE_KEY | input routing/clipboard override | | LESAVKA_KERNEL_BRANCH | kernel build/install override | | LESAVKA_KERNEL_BUILD_ROOT | kernel build/install override | | LESAVKA_KERNEL_BUILD_USER | kernel build/install override | | LESAVKA_KERNEL_COMMIT | kernel build/install override | | LESAVKA_KERNEL_JOBS | kernel build/install override | | LESAVKA_KERNEL_PATCH_DIR | kernel build/install override | | LESAVKA_KERNEL_PATCH_DWC2_FIFO | kernel build/install override | | LESAVKA_KERNEL_PATCH_UVC_BULK | kernel build/install override | | LESAVKA_KERNEL_PATCH_UVC_DEBUG | kernel build/install override | | LESAVKA_KERNEL_PKGREL | kernel build/install override | | LESAVKA_KERNEL_PKG_REPO | kernel build/install override | | LESAVKA_KERNEL_REPO | kernel build/install override | | LESAVKA_KERNEL_UPDATE | kernel build/install override | | LESAVKA_KEYBOARD_DEVICE | input routing/clipboard override | | LESAVKA_LAUNCHER_CAMERA_DIR | launcher UI/runtime override | | LESAVKA_LAUNCHER_CHILD | launcher UI/runtime override | | LESAVKA_LAUNCHER_CLIPBOARD_CONTROL | launcher UI/runtime override | | LESAVKA_LAUNCHER_FOCUS_SIGNAL | launcher UI/runtime override | | LESAVKA_LAUNCHER_INPUT_CONTROL | launcher UI/runtime override | | LESAVKA_LAUNCHER_INPUT_STATE | launcher UI/runtime override | | LESAVKA_LAUNCHER_PARENT_PID | launcher UI/runtime override | | LESAVKA_LAUNCHER_PARENT_START_TICKS | launcher UI/runtime override | | LESAVKA_LAUNCHER_TOGGLE_KEY_CONTROL | launcher UI/runtime override | | LESAVKA_LAUNCHER_WINDOW_TITLE | launcher UI/runtime override | | LESAVKA_LIVE_KEYBOARD_REPORT_DELAY_MS | input routing/clipboard override | | LESAVKA_LIVE_MODIFIER_DELAY_MS | input routing/clipboard override | | LESAVKA_MAX_SPEED | document near use before promoting to operator config | | LESAVKA_MEDIA_CONTROL | launcher-to-relay live media control file; used for soft-pausing camera, mic, or speaker streams without hard-resetting USB | | LESAVKA_MEDIA_GATE_PUSHGATEWAY_JOB | CI metrics destination override | | LESAVKA_MIC_DISABLE | client media capture/playback override | | LESAVKA_MIC_DISABLE_PIPEWIRE | client media capture/playback override | | LESAVKA_MIC_GAIN | client media capture/playback override | | LESAVKA_MIC_GAIN_CONTROL | client media capture/playback override | | LESAVKA_MIC_INIT_ATTEMPTS | client media capture/playback override | | LESAVKA_MIC_INIT_DELAY_MS | client media capture/playback override | | LESAVKA_MIC_SOURCE | client media capture/playback override | | LESAVKA_MIC_TEST_SOURCE_DESC | client media capture/playback override | | LESAVKA_MOUSE_DEVICE | input routing/clipboard override | | LESAVKA_OUTPUT_DELAY_APPLY | manual direct UVC/UAC probe override; apply the measured server output-delay correction through the calibration API when the probe gates pass | | LESAVKA_OUTPUT_DELAY_APPLY_MODE | manual direct UVC/UAC probe override; absolute sets the active output-path baseline to the measured device delay, while relative preserves legacy nudge behavior | | LESAVKA_OUTPUT_DELAY_CALIBRATION | manual direct UVC/UAC probe override; emit output-delay-calibration.json from a lab-attached USB host capture of server-generated signatures, defaults to enabled | | LESAVKA_OUTPUT_DELAY_CONFIRM | manual direct UVC/UAC probe safety gate; after applying a ready output-delay measurement, rerun a fixed-delay confirmation probe that must pass sync, defaults to enabled | | LESAVKA_OUTPUT_DELAY_GAIN | manual direct UVC/UAC probe override; scales measured output-delay correction before applying, defaults to 1.0 | | LESAVKA_OUTPUT_DELAY_MAX_ABS_SKEW_MS | manual direct UVC/UAC probe safety limit; refuses to apply/save implausibly large measured device skew, defaults to 5000 | | LESAVKA_OUTPUT_DELAY_MAX_DRIFT_MS | manual direct UVC/UAC probe stability limit; refuses to apply/save unstable output-delay measurements, defaults to 80 | | LESAVKA_OUTPUT_DELAY_MAX_STEP_US | manual direct UVC/UAC probe safety limit; clamps one measured correction step, defaults to 1500000 | | LESAVKA_OUTPUT_DELAY_MIN_PAIRS | manual direct UVC/UAC probe evidence floor before applying measured output-delay calibration, defaults to 8 | | LESAVKA_OUTPUT_REQUIRE_SYNC_PASS | manual direct UVC/UAC probe safety gate; fail the run unless the analyzer verdict passes sync, used by fixed-delay confirmation | | LESAVKA_OUTPUT_DELAY_SAVE | manual direct UVC/UAC probe override; after applying a ready measured correction, persist it as the server default calibration | | LESAVKA_OUTPUT_DELAY_TARGET | manual direct UVC/UAC probe override; choose whether measured skew is corrected by shifting video or audio, defaults to video | | LESAVKA_OUTPUT_FRESHNESS_MAX_AGE_MS | manual direct UVC/UAC probe freshness gate; maximum clock-corrected server-feed-to-Tethys-observed p95 age, defaults to 1000 | | LESAVKA_OUTPUT_FRESHNESS_MAX_CLOCK_UNCERTAINTY_MS | manual direct UVC/UAC probe freshness trust gate; do not pass freshness when host clock alignment uncertainty exceeds this, defaults to 250 | | LESAVKA_OUTPUT_FRESHNESS_MAX_DRIFT_MS | manual direct UVC/UAC probe freshness gate; maximum allowed freshness drift across paired probe events, defaults to 100 | | LESAVKA_PASTE_DELAY_MS | input routing/clipboard override | | LESAVKA_PASTE_KEY | input routing/clipboard override | | LESAVKA_PASTE_KEY_FILE | input routing/clipboard override | | LESAVKA_PASTE_MAX | input routing/clipboard override | | LESAVKA_PASTE_RPC | input routing/clipboard override | | LESAVKA_PERFORMANCE_GATE_PUSHGATEWAY_JOB | CI metrics destination override for latency/performance checks | | LESAVKA_PREVIEW_HEIGHT | eye preview/video transport override | | LESAVKA_PREVIEW_MAX_KBIT | eye preview/video transport override | | LESAVKA_PREVIEW_REQUEST_FPS | eye preview/video transport override | | LESAVKA_PREVIEW_REQUEST_HEIGHT | eye preview/video transport override | | LESAVKA_PREVIEW_REQUEST_WIDTH | eye preview/video transport override | | LESAVKA_PREVIEW_WIDTH | eye preview/video transport override | | LESAVKA_REF | runtime/install/session override | | LESAVKA_RELOAD_UVCVIDEO | document near use before promoting to operator config | | LESAVKA_REPO_URL | runtime/install/session override | | LESAVKA_REQUIRE_TLS | server security override; require TLS credentials before binding public relay service | | LESAVKA_RGBA | document near use before promoting to operator config | | LESAVKA_SERVER_ADDR | runtime/install/session override | | LESAVKA_SERVER_BIND_ADDR | server bind address override; defaults to 0.0.0.0:50051 | | LESAVKA_INSTALL_SERVER_BIND_ADDR | installer override; sets the persisted default server bind address in /etc/lesavka/server.env | | LESAVKA_SERVER_GADGET_SRC | test/build contract variable; not runtime operator config | | LESAVKA_SERVER_HOST | manual probe override | | LESAVKA_SERVER_MAIN_SRC | test/build contract variable; not runtime operator config | | LESAVKA_SERVER_UVC_BIN_SRC | test/build contract variable; not runtime operator config | | LESAVKA_SERVER_VIDEO_SINKS_SRC | test/build contract variable; not runtime operator config | | LESAVKA_SERVER_VIDEO_SRC | test/build contract variable; not runtime operator config | | LESAVKA_SONAR_ENFORCE | CI gate enforcement override | | LESAVKA_SUPPLY_CHAIN_ENFORCE_TOOLS | CI gate enforcement override | | LESAVKA_TAP_AUDIO | client media capture/playback override | | LESAVKA_TLS_CA | client transport CA path override for relay TLS verification | | LESAVKA_TLS_CA_DAYS | server installer certificate-authority lifetime override | | LESAVKA_TLS_CERT | server TLS certificate path override | | LESAVKA_TLS_CERT_DAYS | server installer leaf certificate lifetime override | | LESAVKA_TLS_CLIENT_AUTH_OPTIONAL | server TLS override; allow clients without certs only for controlled migration/debug | | LESAVKA_TLS_CLIENT_CA | server TLS client-CA path override for mTLS verification | | LESAVKA_TLS_CLIENT_CERT | client transport certificate path override for mTLS | | LESAVKA_TLS_CLIENT_KEY | client transport private-key path override for mTLS | | LESAVKA_TLS_DIR | server installer/runtime TLS directory override | | LESAVKA_TLS_DOMAIN | client transport SNI/domain override when dialing by IP | | LESAVKA_TLS_KEY | server TLS private-key path override | | LESAVKA_TLS_SAN | server installer extra certificate SAN list for additional relay hostnames/IPs | | LESAVKA_UAC_BUFFER_TIME_US | server audio sink latency override | | LESAVKA_UAC_COMPENSATION_US | server audio sink latency override | | LESAVKA_UAC_DEV | server hardware/device override | | LESAVKA_UAC_HDMI_COMPENSATION_US | server HDMI audio sink latency override; defaults to 205000 to hold gadget audio back toward the host-observed HDMI video path | | LESAVKA_UAC_LATENCY_TIME_US | server audio sink latency override | | LESAVKA_UAC_SESSION_CLOCK_ALIGN | server audio sink clock-alignment override; defaults to 0 | | LESAVKA_TEST_CAM_U32 | test/build contract variable; not runtime operator config | | LESAVKA_TEST_CAP_CAMERA | test/build contract variable; not runtime operator config | | LESAVKA_TEST_CAP_MIC | test/build contract variable; not runtime operator config | | LESAVKA_TEST_ASOUND_CARDS | test/build contract variable; not runtime operator config | | LESAVKA_TEST_ASOUND_PCM | test/build contract variable; not runtime operator config | | LESAVKA_TEST_DISABLE_H264_DECODERS | test/build contract variable; not runtime operator config | | LESAVKA_TEST_FORCE_PIPELINE_START_ERROR | test/build contract variable; not runtime operator config | | LESAVKA_TEST_GATE_PUSHGATEWAY_JOB | test/build contract variable; not runtime operator config | | LESAVKA_TEST_RECOVERY_STATE | test/build contract variable; not runtime operator config | | LESAVKA_TEST_RECOVERY_STATE_ERROR | test/build contract variable; not runtime operator config | | LESAVKA_TEST_SKIP_APP | test/build contract variable; not runtime operator config | | LESAVKA_TEST_SWAY_GET_OUTPUTS_EXIT | test/build contract variable; not runtime operator config | | LESAVKA_TEST_SWAY_LOG | test/build contract variable; not runtime operator config | | LESAVKA_TEST_SWAY_OUTPUTS | test/build contract variable; not runtime operator config | | LESAVKA_TEST_SWAY_PLACE_EXIT | test/build contract variable; not runtime operator config | | LESAVKA_TEST_U32 | test/build contract variable; not runtime operator config | | LESAVKA_TEST_U32_OPT | test/build contract variable; not runtime operator config | | LESAVKA_TEST_U8 | test/build contract variable; not runtime operator config | | LESAVKA_TEST_UDEV_CAPTURE_DEVICES | test/build contract variable; not runtime operator config | | LESAVKA_TEST_USIZE | test/build contract variable; not runtime operator config | | LESAVKA_TEST_UVC_HELPER_RESTART_ERR | test/build contract variable; not runtime operator config | | LESAVKA_TEST_VIDEO_SOURCE | test/build contract variable; not runtime operator config | | LESAVKA_TOUCHPAD_SCALE | input routing/clipboard override | | LESAVKA_UAC_DEV | server hardware/device override | | LESAVKA_UAC_SESSION_CLOCK_ALIGN | server audio sink clock-alignment override; 0 is the host-validated default | | LESAVKA_UPSTREAM_AUDIO_PLAYOUT_MODE_OFFSETS_US | server upstream per-UVC-mode UAC output-path map, e.g. 1280x720@20=0,1280x720@30=0,1920x1080@20=0,1920x1080@30=0 | | LESAVKA_UPSTREAM_AUDIO_PLAYOUT_OFFSET_US | server upstream output-path override; v2 uses it as the explicit UAC handoff delay relative to the shared client capture clock | | LESAVKA_UPSTREAM_AUDIO_MASTER_WAIT_GRACE_MS | server upstream sync override; how long video may wait past its nominal due time for UAC audio to reach the matching timestamp, defaults to 350 | | LESAVKA_UPSTREAM_BUNDLED_PLAYOUT_DELAY_MS | compatibility alias for LESAVKA_UPSTREAM_V2_PLAYOUT_DELAY_MS | | LESAVKA_UPSTREAM_MAX_LIVE_LAG_MS | compatibility alias for LESAVKA_UPSTREAM_V2_MAX_LIVE_AGE_MS | | LESAVKA_UPSTREAM_PAIR_SLACK_US | server upstream pairing override; how far video may diverge from the planned audio-master capture moment before the frame is held or dropped, defaults to 80000 | | LESAVKA_UPSTREAM_PLAYOUT_DELAY_MS | server upstream pairing/synchronization target buffer; the server uses this shared buffer to pair webcam frames with matching gadget-mic audio before remote presentation, defaults to 350 | | LESAVKA_UPSTREAM_STARTUP_TIMEOUT_MS | server upstream startup guard; paired startup must converge before this timeout or fail visibly, defaults to 60000 | | LESAVKA_UPSTREAM_STALE_DROP_MS | server upstream freshness override; late audio/video that miss this budget are dropped instead of silently extending lag, defaults to 80 | | LESAVKA_UPSTREAM_TIMING_TRACE | upstream capture/rebase trace override for sync debugging | | LESAVKA_UPSTREAM_V2_MAX_LIVE_AGE_MS | v2 bundled webcam freshness ceiling; bundles already older than this are dropped as one unit, defaults to 1000 | | LESAVKA_UPSTREAM_V2_PLAYOUT_DELAY_MS | v2 optional common playout slack after sync offsets; defaults to 20 and is reduced when needed to protect the live-age budget | | LESAVKA_UPSTREAM_VIDEO_PLAYOUT_MODE_OFFSETS_US | server upstream per-UVC-mode output-path map; shipped MJPEG defaults are 1280x720@20=162659,1280x720@30=135090,1920x1080@20=160045,1920x1080@30=127952 | | LESAVKA_UPSTREAM_VIDEO_PLAYOUT_OFFSET_US | server upstream output-path override; v2 uses it as the explicit UVC handoff delay relative to the shared client capture clock, defaults to the calibrated MJPEG/UVC offset | | LESAVKA_UPLINK_CAMERA_PREVIEW | client media capture/playback override | | LESAVKA_UPLINK_MIC_LEVEL | client media capture/playback override | | LESAVKA_INSTALL_UVC_CODEC | installer override; sets the persisted default UVC webcam codec in /etc/lesavka/server.env and /etc/lesavka/uvc.env | | LESAVKA_USB_RECOVERY_ | USB recovery timing override | | LESAVKA_USB_RECOVERY_CYCLE_WAIT_MS | USB recovery timing override | | LESAVKA_USB_RECOVERY_FINAL_WAIT_MS | USB recovery timing override | | LESAVKA_USB_RECOVERY_REBUILD_WAIT_MS | USB recovery timing override | | LESAVKA_UVC_APP_BLOCK | server hardware/device override | | LESAVKA_UVC_BLOCKING | server hardware/device override | | LESAVKA_UVC_BULK | server hardware/device override | | LESAVKA_UVC_BUFFER_COUNT | UVC helper freshness override; number of queued gadget output buffers, defaults to 2 for live-call freshness | | LESAVKA_UVC_BY_PATH_ROOT | server hardware/device override | | LESAVKA_UVC_CODEC | server hardware/device override | | LESAVKA_UVC_CTRL_BIN | server hardware/device override | | LESAVKA_UVC_CTRL_INTF | server hardware/device override | | LESAVKA_UVC_CTRL_LEN | server hardware/device override | | LESAVKA_UVC_DEBUG | server hardware/device override | | LESAVKA_UVC_DEV | server hardware/device override | | LESAVKA_UVC_DISABLE_IRQ | server hardware/device override | | LESAVKA_UVC_EXTERNAL | server hardware/device override | | LESAVKA_UVC_FALLBACK | server hardware/device override | | LESAVKA_UVC_FPS | server hardware/device override | | LESAVKA_UVC_FRAME_MAX_AGE_MS | UVC helper freshness override; stale spooled MJPEG frames older than this are not replayed, defaults to 1000; 0 disables TTL | | LESAVKA_UVC_FRAME_SIZE | server hardware/device override | | LESAVKA_UVC_HEIGHT | server hardware/device override | | LESAVKA_UVC_IDLE_PUMP_MS | UVC helper freshness override; idle poll sleep while pumping host-returned buffers, defaults to 2 | | LESAVKA_UVC_INTERVAL | server hardware/device override | | LESAVKA_UVC_LIMIT_PCT | server hardware/device override | | LESAVKA_UVC_MAXBURST | server hardware/device override | | LESAVKA_UVC_MAXPACKET | server hardware/device override | | LESAVKA_UVC_MAXPAYLOAD_LIMIT | server hardware/device override | | LESAVKA_UVC_MJPEG | server hardware/device override | | LESAVKA_UVC_SKIP_UDEV | server hardware/device override | | LESAVKA_UVC_STREAMING_INTERVAL | server hardware/device override | | LESAVKA_UVC_STREAM_INTF | server hardware/device override | | LESAVKA_UVC_WIDTH | server hardware/device override | | LESAVKA_VIDEO_MAX_KBIT | eye preview/video transport override | | LESAVKA_VIDEO_QUEUE | eye preview/video transport override | | LESAVKA_VIEW_MODE | launcher UI/runtime override | | LESAVKA_ALLOW_EXTERNAL_UVC_GADGET_CYCLE | server hardware/device override | | LESAVKA_CAPTURE_READY__ | manual probe marker; not runtime operator config | | LESAVKA_FORCE_SOFT_CONNECT | server hardware/device override | | LESAVKA_HDMI_QUEUE_BUFFERS | server HDMI video latency override | | LESAVKA_INSTALL_CAM_OUTPUT | install-time server camera output selection | | LESAVKA_KERNEL_SKIP_CPUINFO_PATCH | kernel build/install override | | LESAVKA_LAUNCHER_MEASURE_EXIT | launcher UI/runtime override | | LESAVKA_LAUNCHER_MEASURE_PATH | launcher UI/runtime override | | LESAVKA_SERVER_CONNECT_HOST | manual probe override | | LESAVKA_SERVER_ENV | server/install environment file override | | LESAVKA_SERVER_LOG_PATH | server logging path override | | LESAVKA_SYNC_PROBE_AUDIO_DUMP | manual probe override | | LESAVKA_UAC_SANITY_DEV | manual UAC sanity probe override | | LESAVKA_UAC_SANITY_FREQ | manual UAC sanity probe override | | LESAVKA_UAC_SANITY_SECONDS | manual UAC sanity probe override | | LESAVKA_UAC_SANITY_VOLUME | manual UAC sanity probe override | | LESAVKA_UPLINK_TELEMETRY | launcher/uplink telemetry path override | | LESAVKA_UPSTREAM_CAMERA_STARTUP_GRACE_MS | upstream A/V timing override | | LESAVKA_UPSTREAM_CAMERA_STARTUP_GRACE_US | upstream A/V timing override used by test contracts and server startup grace handling | | LESAVKA_UPSTREAM_REANCHOR_LATE_MS | upstream A/V timing override | | LESAVKA_UPSTREAM_SOURCE_LAG_CAP_MS | client upstream source freshness cap before camera/mic buffers are treated as stale; defaults to 250 | | LESAVKA_UVC_CONTROL_READ_ONLY | UVC helper runtime override | | LESAVKA_UVC_FRAME_PATH | UVC helper MJPEG frame spool path | | LESAVKA_UVC_LOCK_PATH | UVC helper singleton lock path | | LESAVKA_UVC_MJPEG_IO_MODE | UVC helper MJPEG streaming mode override | | LESAVKA_UVC_MJPEG_SPOOL | UVC helper MJPEG spool toggle | | LESAVKA_UVC_SESSION_CLOCK_ALIGN | UVC helper timing override |

Recently documented upstream probe and calibration knobs

These entries are intentionally concise because most are manual lab or CI harness controls. The detailed behavior lives in the scripts and source that consume them; this table keeps every LESAVKA_* knob discoverable for operators and the hygiene gate.

| LESAVKA_CAM_EMIT_UI_PROFILE | client camera/profile negotiation override; used by launcher or lab probes to control emitted capture profile metadata | | LESAVKA_CAM_LOCK_TO_SERVER_PROFILE | client camera/profile negotiation override; used by launcher or lab probes to control emitted capture profile metadata | | LESAVKA_EYE_FIRST_FRAME_TIMEOUT_MS | runtime/install/session override; document near use before promoting to broader operator config | | LESAVKA_INSTALL_UPSTREAM_AUDIO_PLAYOUT_OFFSET_US | installer default override; seeds server calibration env files with known lab-measured output-path offsets | | LESAVKA_INSTALL_UPSTREAM_VIDEO_PLAYOUT_OFFSET_US | installer default override; seeds server calibration env files with known lab-measured output-path offsets | | LESAVKA_LEGACY_SPLIT_UPLINK | runtime/install/session override; document near use before promoting to broader operator config | | LESAVKA_MIC_PACKET_TARGET_US | client microphone capture override; tunes Pulse/PipeWire packet sizing, buffering, or selected source behavior | | LESAVKA_MIC_PULSE_BUFFER_TIME_US | client microphone capture override; tunes Pulse/PipeWire packet sizing, buffering, or selected source behavior | | LESAVKA_MIC_PULSE_LATENCY_TIME_US | client microphone capture override; tunes Pulse/PipeWire packet sizing, buffering, or selected source behavior | | LESAVKA_MODE | manual probe/server connection override used to resolve the target Lesavka server and mode under test | | LESAVKA_OPEN_MANUAL_REVIEW_DOLPHIN | manual browser-stimulus probe override; controls local review browser behavior for mirrored upstream A/V tests | | LESAVKA_OUTPUT_DELAY_CONFIRMING | manual direct UVC/UAC output-delay probe override; controls server-generated output calibration, confirmation, freshness, or reporting | | LESAVKA_OUTPUT_DELAY_PROBE_AUDIO_DELAY_US | manual direct UVC/UAC output-delay probe override; controls server-generated output calibration, confirmation, freshness, or reporting | | LESAVKA_OUTPUT_DELAY_PROBE_VIDEO_DELAY_US | manual direct UVC/UAC output-delay probe override; controls server-generated output calibration, confirmation, freshness, or reporting | | LESAVKA_OUTPUT_FRESHNESS_MIN_PAIRS | manual direct UVC/UAC output-delay probe override; controls server-generated output calibration, confirmation, freshness, or reporting | | LESAVKA_REQUIRE_EXPLICIT_MEDIA_SOURCES | test/build contract variable; keeps deterministic coverage and probe preconditions explicit in CI or manual harnesses | | LESAVKA_REQUIRE_SYNC_PROBE | test/build contract variable; keeps deterministic coverage and probe preconditions explicit in CI or manual harnesses | | LESAVKA_SERVER_PORT | manual probe/server connection override used to resolve the target Lesavka server and mode under test | | LESAVKA_SERVER_RC_ALLOW_GADGET_RESET | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_ANALYSIS_TIMELINE_WINDOW | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_CONTINUE_ON_FAIL | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_CORE_WEBCAM_MODES | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_DEFAULT_AUDIO_DELAY_US | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_DEFAULT_VIDEO_DELAY_US | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_FORCE_GADGET_REBUILD | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_FRESHNESS_MAX_AGE_MS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_FRESHNESS_MAX_CLOCK_UNCERTAINTY_MS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_FRESHNESS_MAX_DRIFT_MS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_FRESHNESS_MIN_PAIRS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MAX_AUDIO_HICCUPS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MAX_AUDIO_LOW_RMS_WINDOWS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MAX_AUDIO_P95_JITTER_MS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MAX_VIDEO_DUPLICATE_FRAMES | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MAX_VIDEO_HICCUPS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MAX_VIDEO_MISSING_FRAMES | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MAX_VIDEO_P95_JITTER_MS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MAX_VIDEO_UNDECODABLE_FRAMES | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MIN_CODED_PAIRS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MODES | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MODE_AUDIO_DELAYS_US | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MODE_DELAYS_US | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MODE_DISCOVERY_EXCLUDE_REGEX | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MODE_DISCOVERY_FPS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MODE_DISCOVERY_INCLUDE_REGEX | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MODE_DISCOVERY_SIZES | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_MODE_SOURCE | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_PREROLL_DISCARD_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_PROBE_PREBUILD | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_PROMPT_SUDO_EARLY | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_RECONFIGURE | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_RECONFIGURE_CODEC | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_RECONFIGURE_COMMAND | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_RECONFIGURE_REF | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_RECONFIGURE_SETTLE_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_RECONFIGURE_STRATEGY | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_RECONFIGURE_UPDATE | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_RECONFIGURE_VERBOSE | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_REMOTE_SUDO_PASSWORD | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_REPEAT_COUNT | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_REQUIRE_ALL_CODED_PAIRS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_REQUIRE_FRESHNESS_PASS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_REQUIRE_SMOOTHNESS_PASS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_REQUIRE_SYNC_PASS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_CONDITION_EVENT_WIDTH_CODES | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_CONDITION_GAP_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_CONDITION_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_CONDITION_WARMUP_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_READY | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_READY_ATTEMPTS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_READY_DURATION_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_READY_MIN_PAIRS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_READY_MODE | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_READY_RETRY_DELAY_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_SIGNAL_READY_WARMUP_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_START_DELAY_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_STATIC_MAX_MEDIAN_SKEW_MS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_STATIC_MAX_P95_SKEW_MS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_STATIC_MAX_SPREAD_US | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_STATIC_MIN_RUNS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_STATIC_REQUIRE_FRESHNESS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_STATIC_REQUIRE_SMOOTHNESS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_TETHYS_READY_TIMEOUT_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_TETHYS_SETTLE_SECONDS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_TUNE_CONFIRM | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_TUNE_DELAYS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_TUNE_MAX_ABS_SKEW_MS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_TUNE_MAX_DRIFT_MS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_TUNE_MAX_STEP_US | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_TUNE_MIN_CHANGE_US | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_TUNE_MIN_PAIRS | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_VERBOSE_PROBES | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_RC_WAIT_TETHYS_READY | manual server-to-RCT mode-matrix probe override; used to tune, confirm, or summarize server-generated UVC/UAC output against the RC capture target | | LESAVKA_SERVER_REPO | manual probe/server connection override used to resolve the target Lesavka server and mode under test | | LESAVKA_SERVER_SCHEME | manual probe/server connection override used to resolve the target Lesavka server and mode under test | | LESAVKA_STIMULUS_BROWSER_KIOSK | manual browser-stimulus probe override; controls local review browser behavior for mirrored upstream A/V tests | | LESAVKA_STIMULUS_PREVIEW_SECONDS | manual browser-stimulus probe override; controls local review browser behavior for mirrored upstream A/V tests | | LESAVKA_SYNC_ADAPTIVE_CALIBRATION | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_APPLY_CALIBRATION | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_CALIBRATION_SEGMENTS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_CALIBRATION_SEGMENTS_SET | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_CALIBRATION_TARGET | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_CONFIRMATION_SEGMENTS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_CONFIRM_AFTER_CALIBRATION | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_CONTINUE_ON_ANALYSIS_FAILURE | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_CONTINUOUS_BROWSER | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_PROBE_REPORT_DIR | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_PROBE_REPORT_JSON | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_PROVISIONAL_CALIBRATION | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_PROVISIONAL_GAIN | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_PROVISIONAL_MAX_DRIFT_MS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_PROVISIONAL_MAX_P95_MS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_PROVISIONAL_MAX_STEP_US | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_PROVISIONAL_MIN_PAIRS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_RAW_FAILURE_CALIBRATION | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_RAW_FAILURE_MAX_ABS_DELTA_MS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_RAW_FAILURE_MIN_PAIRS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_REQUIRE_CONFIRMATION_PASS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_SAVE_CALIBRATION | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_SEGMENT_SETTLE_SECONDS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_SYNC_TOTAL_SEGMENTS | manual upstream A/V sync probe override; controls mirrored/client-to-server calibration, confirmation, reporting, or failure handling | | LESAVKA_TEST_CAP_BUNDLED | test/build contract variable; keeps deterministic coverage and probe preconditions explicit in CI or manual harnesses | | LESAVKA_UAC_APP_MAX_BUFFERS | server UAC appsrc buffering override for lab tuning of microphone gadget output latency and stability | | LESAVKA_UAC_APP_MAX_BYTES | server UAC appsrc buffering override for lab tuning of microphone gadget output latency and stability | | LESAVKA_UAC_APP_MAX_TIME_NS | server UAC appsrc buffering override for lab tuning of microphone gadget output latency and stability | | LESAVKA_UPSTREAM_BLIND_HEAL | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_COOLDOWN_MS | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_DEADBAND_MS | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_GAIN | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_INTERVAL_MS | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_MAX_CLIENT_SEND_P95_MS | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_MAX_HANDOFF_P95_MS | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_MAX_QUEUE_AGE_P95_MS | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_MAX_SERVER_RECEIVE_P95_MS | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_MAX_SINK_LATE_P95_MS | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_MAX_STEP_US | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_MIN_SAMPLES | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_BLIND_HEAL_TARGET | server upstream media blind-healer tuning knob; adjusts cautious runtime offset correction when telemetry indicates persistent skew | | LESAVKA_UPSTREAM_SOURCE_LEAD_CAP_MS | server upstream media timing override; bounds live source lead or playout behavior while tuning client-to-server transport | | LESAVKA_UVC_CONFIGFS_BASE | server UVC gadget mode/configfs override used by runtime reconfiguration and hardware-in-the-loop probes | | LESAVKA_UVC_MODE | server UVC gadget mode/configfs override used by runtime reconfiguration and hardware-in-the-loop probes |