# Lesavka operational environment variables

This is the tracked inventory for `LESAVKA_*` knobs used by source, scripts, CI, and tests. The hygiene gate fails when a new variable is added without appearing here, which keeps operator-facing configuration from drifting into folklore.

Hardware-facing assumptions belong near the code that uses them; this file is the repo-wide index.

Install security flow: the server installer creates `/etc/lesavka/lesavka-client-pki.tar.gz`
and makes it readable only by the installing account. The client installer first uses
`LESAVKA_CLIENT_PKI_BUNDLE` when supplied, otherwise it tries to fetch that same bundle
from `LESAVKA_CLIENT_PKI_SSH_SOURCE` over SSH. Runtime clients require the installed
`ca.crt`, `client.crt`, and `client.key` for HTTPS/mTLS relay connections.

| `LESAVKA_ALLOW_GADGET_CYCLE` | document near use before promoting to operator config |
| `LESAVKA_ALLOW_GADGET_RESET` | permits installer/recovery flows to reset the USB gadget when a hard rebuild is otherwise required; by itself it must not force a live attached-host reset |
| `LESAVKA_ALLOW_INSECURE` | client transport override; permits non-local `http://` relay URLs only for lab/debug use |
| `LESAVKA_ALSA_DEV` | server hardware/device override |
| `LESAVKA_ATTACH_WRITE_UDC` | server hardware/device override |
| `LESAVKA_AUDIO_AUTO_RECOVER_AFTER` | client media capture/playback override |
| `LESAVKA_AUDIO_AUTO_RECOVER_COOLDOWN_MS` | client media capture/playback override |
| `LESAVKA_AUDIO_AUTO_RECOVER_USB` | client media capture/playback override |
| `LESAVKA_AUDIO_DISABLE` | client media capture/playback override |
| `LESAVKA_AUDIO_GAIN` | client media capture/playback override |
| `LESAVKA_AUDIO_GAIN_CONTROL` | client media capture/playback override |
| `LESAVKA_AUDIO_FAIL_ON_IDLE` | server remote-speaker capture debug guardrail; default keeps idle UAC streams open |
| `LESAVKA_AUDIO_INIT_ATTEMPTS` | client media capture/playback override |
| `LESAVKA_AUDIO_INIT_DELAY_MS` | client media capture/playback override |
| `LESAVKA_AUDIO_MIN_PACKETS_PER_SEC` | server remote-speaker capture debug guardrail; unset disables packet-rate hard failures |
| `LESAVKA_AUDIO_SINK` | client media capture/playback override |
| `LESAVKA_AUDIO_SOURCE_GRACE_MS` | server remote-speaker capture startup grace before optional watchdog checks |
| `LESAVKA_AUDIO_SOURCE_IDLE_MS` | server remote-speaker capture idle window used only when idle hard-fail is enabled |
| `LESAVKA_BOOL_TEST` | test/build contract variable; not runtime operator config |
| `LESAVKA_BREAKOUT_PREVIEW_HEIGHT` | eye preview/video transport override |
| `LESAVKA_BREAKOUT_PREVIEW_MAX_KBIT` | eye preview/video transport override |
| `LESAVKA_BREAKOUT_PREVIEW_WIDTH` | eye preview/video transport override |
| `LESAVKA_BREAKOUT_REQUEST_FPS` | eye preview/video transport override |
| `LESAVKA_BREAKOUT_REQUEST_HEIGHT` | eye preview/video transport override |
| `LESAVKA_BREAKOUT_REQUEST_WIDTH` | eye preview/video transport override |
| `LESAVKA_CAM_ALLOW_PROFILE_OVERRIDE` | lab-only override that lets launcher camera width/height/fps env values beat the server-negotiated UVC profile |
| `LESAVKA_CAM_BY_ID_DIR` | client media capture/playback override |
| `LESAVKA_CAM_CODEC` | client media capture/playback override |
| `LESAVKA_CAM_DEV_ROOT` | client media capture/playback override |
| `LESAVKA_CAM_DISABLE` | client media capture/playback override |
| `LESAVKA_CAM_FORMAT` | client media capture/playback override |
| `LESAVKA_CAM_FPS` | client media capture/playback override |
| `LESAVKA_CAM_H264_KBIT` | client media capture/playback override |
| `LESAVKA_CAM_HEIGHT` | client media capture/playback override |
| `LESAVKA_CAM_JPEG_QUALITY` | client media capture/playback override |
| `LESAVKA_CAM_KEYFRAME_INTERVAL` | client media capture/playback override |
| `LESAVKA_CAM_MJPG` | client media capture/playback override |
| `LESAVKA_CAM_OUTPUT` | client media capture/playback override |
| `LESAVKA_CAM_SOURCE` | client media capture/playback override |
| `LESAVKA_CAM_TEST_ENCODER` | client media capture/playback override |
| `LESAVKA_CAM_TEST_PATTERN` | client media capture/playback override |
| `LESAVKA_CAM_WIDTH` | client media capture/playback override |
| `LESAVKA_CALIBRATION_PATH` | server upstream A/V calibration storage path override |
| `LESAVKA_CAPTURE_POWER_GRACE_SECS` | runtime/install/session override |
| `LESAVKA_CAPTURE_POWER_UNIT` | runtime/install/session override |
| `LESAVKA_CAPTURE_REMOTE` | runtime/install/session override |
| `LESAVKA_CLIENT_APP_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_BUNDLE` | server installer output path for the generated client TLS enrollment bundle |
| `LESAVKA_CLIENT_CAPTURE_DIR` | client installer capture folder override; defaults to `~/Pictures/lesavka` |
| `LESAVKA_CLIENT_CAMERA_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_INPUTS_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_KEYBOARD_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_MAIN_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_MICROPHONE_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_MOUSE_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_OUTPUT_AUDIO_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_OUTPUT_DISPLAY_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_OUTPUT_VIDEO_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_PKI_BUNDLE` | client installer input path for a server-generated TLS enrollment bundle |
| `LESAVKA_CLIENT_PKI_AUTO_FETCH` | client installer toggle for SSH enrollment auto-fetch; defaults to enabled |
| `LESAVKA_CLIENT_PKI_DIR` | client installer/runtime TLS identity directory override |
| `LESAVKA_CLIENT_PKI_SSH_SOURCE` | client installer SSH source for auto-fetching the server enrollment bundle; defaults to `theia:/etc/lesavka/lesavka-client-pki.tar.gz` |
| `LESAVKA_CLIENT_RELAYCTL_BIN_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIENT_VIDEO_SUPPORT_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CLIPBOARD_CHORD` | input routing/clipboard override |
| `LESAVKA_CLIPBOARD_CMD` | input routing/clipboard override |
| `LESAVKA_CLIPBOARD_DEBOUNCE_MS` | input routing/clipboard override |
| `LESAVKA_CLIPBOARD_DELAY_MS` | input routing/clipboard override |
| `LESAVKA_CLIPBOARD_MAX` | input routing/clipboard override |
| `LESAVKA_CLIPBOARD_PASTE` | input routing/clipboard override |
| `LESAVKA_CLIPBOARD_TIMEOUT_MS` | input routing/clipboard override |
| `LESAVKA_COMMON_CLI_BIN_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_CORE_HELPER` | runtime/install/session override |
| `LESAVKA_DECODER_PROBE_BUFFERS` | manual probe override |
| `LESAVKA_DECODER_PROBE_POLL_SECONDS` | manual probe override |
| `LESAVKA_DECODER_PROBE_WAIT_SECONDS` | manual probe override |
| `LESAVKA_DETACH_CLEAR_UDC` | server hardware/device override |
| `LESAVKA_DEV_MODE` | document near use before promoting to operator config |
| `LESAVKA_DISABLE_UAC` | document near use before promoting to operator config |
| `LESAVKA_DISABLE_UVC` | document near use before promoting to operator config |
| `LESAVKA_DISABLE_VIDEO_RENDER` | eye preview/video transport override |
| `LESAVKA_DUMP_VIDEO` | eye preview/video transport override |
| `LESAVKA_EYE_ADAPTIVE` | eye preview/video transport override |
| `LESAVKA_EYE_APPSINK_BUFFERS` | eye preview/video transport override |
| `LESAVKA_EYE_CAP_POLL_SECONDS` | eye preview/video transport override |
| `LESAVKA_EYE_CAP_WAIT_SECONDS` | eye preview/video transport override |
| `LESAVKA_EYE_CHAN_CAPACITY` | eye preview/video transport override |
| `LESAVKA_EYE_DEVICE_POLL_MS` | eye preview/video transport override |
| `LESAVKA_EYE_DEVICE_WAIT_MS` | eye preview/video transport override |
| `LESAVKA_EYE_FPS` | eye preview/video transport override |
| `LESAVKA_EYE_KEYFRAME_INTERVAL` | eye preview/video transport override |
| `LESAVKA_EYE_MIN_FPS` | eye preview/video transport override |
| `LESAVKA_EYE_QUEUE_BUFFERS` | eye preview/video transport override |
| `LESAVKA_EYE_TESTSRC_KBIT` | eye preview/video transport override |
| `LESAVKA_FAKE_SYSTEMCTL_MODE` | test/build contract variable; not runtime operator config |
| `LESAVKA_FOCUS_LAUNCHER_ON_LOCAL` | launcher UI/runtime override |
| `LESAVKA_FORCE_CORE_REBUILD_WITHOUT_UDC` | document near use before promoting to operator config |
| `LESAVKA_FORCE_GADGET_REBUILD` | explicit maintenance-window override for hard UDC detach/rebind during server install; pair with `LESAVKA_ALLOW_GADGET_RESET=1` only when a live gadget rebuild is intentional |
| `LESAVKA_GADGET_CONFIGFS_ROOT` | server hardware/device override |
| `LESAVKA_GADGET_FORCE_CYCLE` | server hardware/device override |
| `LESAVKA_GADGET_SYSFS_ROOT` | server hardware/device override |
| `LESAVKA_GIT_SHA` | runtime/install/session override |
| `LESAVKA_H264_DECODER` | eye preview/video transport override |
| `LESAVKA_HDMI_CONNECTOR` | server hardware/device override |
| `LESAVKA_HDMI_DRIVER` | server hardware/device override |
| `LESAVKA_HDMI_FBDEV` | server hardware/device override |
| `LESAVKA_HDMI_PRESENTATION_DELAY_US` | server HDMI video latency override |
| `LESAVKA_HDMI_HEIGHT` | server hardware/device override |
| `LESAVKA_HDMI_MODES` | server hardware/device override |
| `LESAVKA_HDMI_RESTORE_CRTC` | server hardware/device override |
| `LESAVKA_HDMI_SINK` | server hardware/device override |
| `LESAVKA_HDMI_SKIP_VSYNC` | server hardware/device override |
| `LESAVKA_HDMI_WIDTH` | server hardware/device override |
| `LESAVKA_HEADLESS` | runtime/install/session override |
| `LESAVKA_HELPER_ENV_DUMP` | document near use before promoting to operator config |
| `LESAVKA_HID_DIR` | server hardware/device override |
| `LESAVKA_HID_WRITE_RETRIES` | server hardware/device override |
| `LESAVKA_HID_WRITE_RETRY_DELAY_MS` | server hardware/device override |
| `LESAVKA_HW_H264` | document near use before promoting to operator config |
| `LESAVKA_ICON_NAME` | launcher UI/runtime override |
| `LESAVKA_ICON_SEARCH_PATH` | launcher UI/runtime override |
| `LESAVKA_INPUT_RELEASE_TIMEOUT_MS` | input routing/clipboard override |
| `LESAVKA_INPUT_REMOTE_FAILSAFE_MS` | input routing/clipboard override |
| `LESAVKA_INPUT_REMOTE_FAILSAFE_SECS` | input routing/clipboard override |
| `LESAVKA_INPUT_RESCAN_MS` | input routing/clipboard override |
| `LESAVKA_INPUT_TOGGLE_DEBOUNCE_MS` | input routing/clipboard override |
| `LESAVKA_INPUT_TOGGLE_KEY` | input routing/clipboard override |
| `LESAVKA_KERNEL_BRANCH` | kernel build/install override |
| `LESAVKA_KERNEL_BUILD_ROOT` | kernel build/install override |
| `LESAVKA_KERNEL_BUILD_USER` | kernel build/install override |
| `LESAVKA_KERNEL_COMMIT` | kernel build/install override |
| `LESAVKA_KERNEL_JOBS` | kernel build/install override |
| `LESAVKA_KERNEL_PATCH_DIR` | kernel build/install override |
| `LESAVKA_KERNEL_PATCH_DWC2_FIFO` | kernel build/install override |
| `LESAVKA_KERNEL_PATCH_UVC_BULK` | kernel build/install override |
| `LESAVKA_KERNEL_PATCH_UVC_DEBUG` | kernel build/install override |
| `LESAVKA_KERNEL_PKGREL` | kernel build/install override |
| `LESAVKA_KERNEL_PKG_REPO` | kernel build/install override |
| `LESAVKA_KERNEL_REPO` | kernel build/install override |
| `LESAVKA_KERNEL_UPDATE` | kernel build/install override |
| `LESAVKA_KEYBOARD_DEVICE` | input routing/clipboard override |
| `LESAVKA_LAUNCHER_CAMERA_DIR` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_CHILD` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_CLIPBOARD_CONTROL` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_FOCUS_SIGNAL` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_INPUT_CONTROL` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_INPUT_STATE` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_PARENT_PID` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_PARENT_START_TICKS` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_TOGGLE_KEY_CONTROL` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_WINDOW_TITLE` | launcher UI/runtime override |
| `LESAVKA_LIVE_KEYBOARD_REPORT_DELAY_MS` | input routing/clipboard override |
| `LESAVKA_LIVE_MODIFIER_DELAY_MS` | input routing/clipboard override |
| `LESAVKA_MAX_SPEED` | document near use before promoting to operator config |
| `LESAVKA_MEDIA_CONTROL` | launcher-to-relay live media control file; used for soft-pausing camera, mic, or speaker streams without hard-resetting USB |
| `LESAVKA_MEDIA_GATE_PUSHGATEWAY_JOB` | CI metrics destination override |
| `LESAVKA_MIC_DISABLE` | client media capture/playback override |
| `LESAVKA_MIC_DISABLE_PIPEWIRE` | client media capture/playback override |
| `LESAVKA_MIC_GAIN` | client media capture/playback override |
| `LESAVKA_MIC_GAIN_CONTROL` | client media capture/playback override |
| `LESAVKA_MIC_INIT_ATTEMPTS` | client media capture/playback override |
| `LESAVKA_MIC_INIT_DELAY_MS` | client media capture/playback override |
| `LESAVKA_MIC_SOURCE` | client media capture/playback override |
| `LESAVKA_MIC_TEST_SOURCE_DESC` | client media capture/playback override |
| `LESAVKA_MOUSE_DEVICE` | input routing/clipboard override |
| `LESAVKA_PASTE_DELAY_MS` | input routing/clipboard override |
| `LESAVKA_PASTE_KEY` | input routing/clipboard override |
| `LESAVKA_PASTE_KEY_FILE` | input routing/clipboard override |
| `LESAVKA_PASTE_MAX` | input routing/clipboard override |
| `LESAVKA_PASTE_RPC` | input routing/clipboard override |
| `LESAVKA_PERFORMANCE_GATE_PUSHGATEWAY_JOB` | CI metrics destination override for latency/performance checks |
| `LESAVKA_PREVIEW_HEIGHT` | eye preview/video transport override |
| `LESAVKA_PREVIEW_MAX_KBIT` | eye preview/video transport override |
| `LESAVKA_PREVIEW_REQUEST_FPS` | eye preview/video transport override |
| `LESAVKA_PREVIEW_REQUEST_HEIGHT` | eye preview/video transport override |
| `LESAVKA_PREVIEW_REQUEST_WIDTH` | eye preview/video transport override |
| `LESAVKA_PREVIEW_WIDTH` | eye preview/video transport override |
| `LESAVKA_REF` | runtime/install/session override |
| `LESAVKA_RELOAD_UVCVIDEO` | document near use before promoting to operator config |
| `LESAVKA_REPO_URL` | runtime/install/session override |
| `LESAVKA_REQUIRE_TLS` | server security override; require TLS credentials before binding public relay service |
| `LESAVKA_RGBA` | document near use before promoting to operator config |
| `LESAVKA_SERVER_ADDR` | runtime/install/session override |
| `LESAVKA_SERVER_BIND_ADDR` | server bind address override; defaults to `0.0.0.0:50051` |
| `LESAVKA_INSTALL_SERVER_BIND_ADDR` | installer override; sets the persisted default server bind address in `/etc/lesavka/server.env` |
| `LESAVKA_SERVER_GADGET_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_SERVER_HOST` | manual probe override |
| `LESAVKA_SERVER_MAIN_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_SERVER_UVC_BIN_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_SERVER_VIDEO_SINKS_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_SERVER_VIDEO_SRC` | test/build contract variable; not runtime operator config |
| `LESAVKA_SONAR_ENFORCE` | CI gate enforcement override |
| `LESAVKA_SUPPLY_CHAIN_ENFORCE_TOOLS` | CI gate enforcement override |
| `LESAVKA_TAP_AUDIO` | client media capture/playback override |
| `LESAVKA_TLS_CA` | client transport CA path override for relay TLS verification |
| `LESAVKA_TLS_CA_DAYS` | server installer certificate-authority lifetime override |
| `LESAVKA_TLS_CERT` | server TLS certificate path override |
| `LESAVKA_TLS_CERT_DAYS` | server installer leaf certificate lifetime override |
| `LESAVKA_TLS_CLIENT_AUTH_OPTIONAL` | server TLS override; allow clients without certs only for controlled migration/debug |
| `LESAVKA_TLS_CLIENT_CA` | server TLS client-CA path override for mTLS verification |
| `LESAVKA_TLS_CLIENT_CERT` | client transport certificate path override for mTLS |
| `LESAVKA_TLS_CLIENT_KEY` | client transport private-key path override for mTLS |
| `LESAVKA_TLS_DIR` | server installer/runtime TLS directory override |
| `LESAVKA_TLS_DOMAIN` | client transport SNI/domain override when dialing by IP |
| `LESAVKA_TLS_KEY` | server TLS private-key path override |
| `LESAVKA_TLS_SAN` | server installer extra certificate SAN list for additional relay hostnames/IPs |
| `LESAVKA_UAC_BUFFER_TIME_US` | server audio sink latency override |
| `LESAVKA_UAC_COMPENSATION_US` | server audio sink latency override |
| `LESAVKA_UAC_DEV` | server hardware/device override |
| `LESAVKA_UAC_HDMI_COMPENSATION_US` | server HDMI audio sink latency override; defaults to `205000` to hold gadget audio back toward the host-observed HDMI video path |
| `LESAVKA_UAC_LATENCY_TIME_US` | server audio sink latency override |
| `LESAVKA_UAC_SESSION_CLOCK_ALIGN` | server audio sink clock-alignment override; defaults to `0` |
| `LESAVKA_TEST_CAM_U32` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_CAP_CAMERA` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_CAP_MIC` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_ASOUND_CARDS` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_ASOUND_PCM` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_DISABLE_H264_DECODERS` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_FORCE_PIPELINE_START_ERROR` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_GATE_PUSHGATEWAY_JOB` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_RECOVERY_STATE` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_RECOVERY_STATE_ERROR` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_SKIP_APP` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_SWAY_GET_OUTPUTS_EXIT` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_SWAY_LOG` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_SWAY_OUTPUTS` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_SWAY_PLACE_EXIT` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_U32` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_U32_OPT` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_U8` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_UDEV_CAPTURE_DEVICES` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_USIZE` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_UVC_HELPER_RESTART_ERR` | test/build contract variable; not runtime operator config |
| `LESAVKA_TEST_VIDEO_SOURCE` | test/build contract variable; not runtime operator config |
| `LESAVKA_TOUCHPAD_SCALE` | input routing/clipboard override |
| `LESAVKA_UAC_DEV` | server hardware/device override |
| `LESAVKA_UAC_SESSION_CLOCK_ALIGN` | server audio sink clock-alignment override; `0` is the host-validated default |
| `LESAVKA_UPSTREAM_AUDIO_PLAYOUT_OFFSET_US` | server upstream playout override; shifts gadget-audio presentation relative to the shared playout epoch |
| `LESAVKA_UPSTREAM_MAX_LIVE_LAG_MS` | server upstream planner freshness ceiling; planner-approved audio/video should not exceed this live lag budget, defaults to `1000` |
| `LESAVKA_UPSTREAM_PAIR_SLACK_US` | server upstream pairing override; how far video may diverge from the planned audio-master capture moment before the frame is held or dropped, defaults to `80000` |
| `LESAVKA_UPSTREAM_PLAYOUT_DELAY_MS` | server upstream pairing/synchronization target buffer; the server uses this shared buffer to pair webcam frames with matching gadget-mic audio before remote presentation, defaults to `350` |
| `LESAVKA_UPSTREAM_STARTUP_TIMEOUT_MS` | server upstream startup guard; paired startup must converge before this timeout or fail visibly, defaults to `60000` |
| `LESAVKA_UPSTREAM_STALE_DROP_MS` | server upstream freshness override; late audio/video that miss this budget are dropped instead of silently extending lag, defaults to `80` |
| `LESAVKA_UPSTREAM_TIMING_TRACE` | upstream capture/rebase trace override for sync debugging |
| `LESAVKA_UPSTREAM_VIDEO_PLAYOUT_OFFSET_US` | server upstream playout override; shifts webcam-video presentation relative to the shared playout epoch, defaults to `350000` for MJPEG/UVC browser egress compensation |
| `LESAVKA_UPLINK_CAMERA_PREVIEW` | client media capture/playback override |
| `LESAVKA_UPLINK_MIC_LEVEL` | client media capture/playback override |
| `LESAVKA_INSTALL_UVC_CODEC` | installer override; sets the persisted default UVC webcam codec in `/etc/lesavka/server.env` and `/etc/lesavka/uvc.env` |
| `LESAVKA_USB_RECOVERY_` | USB recovery timing override |
| `LESAVKA_USB_RECOVERY_CYCLE_WAIT_MS` | USB recovery timing override |
| `LESAVKA_USB_RECOVERY_FINAL_WAIT_MS` | USB recovery timing override |
| `LESAVKA_USB_RECOVERY_REBUILD_WAIT_MS` | USB recovery timing override |
| `LESAVKA_UVC_APP_BLOCK` | server hardware/device override |
| `LESAVKA_UVC_BLOCKING` | server hardware/device override |
| `LESAVKA_UVC_BULK` | server hardware/device override |
| `LESAVKA_UVC_BY_PATH_ROOT` | server hardware/device override |
| `LESAVKA_UVC_CODEC` | server hardware/device override |
| `LESAVKA_UVC_CTRL_BIN` | server hardware/device override |
| `LESAVKA_UVC_CTRL_INTF` | server hardware/device override |
| `LESAVKA_UVC_CTRL_LEN` | server hardware/device override |
| `LESAVKA_UVC_DEBUG` | server hardware/device override |
| `LESAVKA_UVC_DEV` | server hardware/device override |
| `LESAVKA_UVC_DISABLE_IRQ` | server hardware/device override |
| `LESAVKA_UVC_EXTERNAL` | server hardware/device override |
| `LESAVKA_UVC_FALLBACK` | server hardware/device override |
| `LESAVKA_UVC_FPS` | server hardware/device override |
| `LESAVKA_UVC_FRAME_SIZE` | server hardware/device override |
| `LESAVKA_UVC_HEIGHT` | server hardware/device override |
| `LESAVKA_UVC_INTERVAL` | server hardware/device override |
| `LESAVKA_UVC_LIMIT_PCT` | server hardware/device override |
| `LESAVKA_UVC_MAXBURST` | server hardware/device override |
| `LESAVKA_UVC_MAXPACKET` | server hardware/device override |
| `LESAVKA_UVC_MAXPAYLOAD_LIMIT` | server hardware/device override |
| `LESAVKA_UVC_MJPEG` | server hardware/device override |
| `LESAVKA_UVC_SKIP_UDEV` | server hardware/device override |
| `LESAVKA_UVC_STREAMING_INTERVAL` | server hardware/device override |
| `LESAVKA_UVC_STREAM_INTF` | server hardware/device override |
| `LESAVKA_UVC_WIDTH` | server hardware/device override |
| `LESAVKA_VIDEO_MAX_KBIT` | eye preview/video transport override |
| `LESAVKA_VIDEO_QUEUE` | eye preview/video transport override |
| `LESAVKA_VIEW_MODE` | launcher UI/runtime override |
| `LESAVKA_ALLOW_EXTERNAL_UVC_GADGET_CYCLE` | server hardware/device override |
| `LESAVKA_CAPTURE_READY__` | manual probe marker; not runtime operator config |
| `LESAVKA_FORCE_SOFT_CONNECT` | server hardware/device override |
| `LESAVKA_HDMI_QUEUE_BUFFERS` | server HDMI video latency override |
| `LESAVKA_INSTALL_CAM_OUTPUT` | install-time server camera output selection |
| `LESAVKA_KERNEL_SKIP_CPUINFO_PATCH` | kernel build/install override |
| `LESAVKA_LAUNCHER_MEASURE_EXIT` | launcher UI/runtime override |
| `LESAVKA_LAUNCHER_MEASURE_PATH` | launcher UI/runtime override |
| `LESAVKA_SERVER_CONNECT_HOST` | manual probe override |
| `LESAVKA_SERVER_ENV` | server/install environment file override |
| `LESAVKA_SERVER_LOG_PATH` | server logging path override |
| `LESAVKA_SYNC_PROBE_AUDIO_DUMP` | manual probe override |
| `LESAVKA_UAC_SANITY_DEV` | manual UAC sanity probe override |
| `LESAVKA_UAC_SANITY_FREQ` | manual UAC sanity probe override |
| `LESAVKA_UAC_SANITY_SECONDS` | manual UAC sanity probe override |
| `LESAVKA_UAC_SANITY_VOLUME` | manual UAC sanity probe override |
| `LESAVKA_UPLINK_TELEMETRY` | launcher/uplink telemetry path override |
| `LESAVKA_UPSTREAM_CAMERA_STARTUP_GRACE_MS` | upstream A/V timing override |
| `LESAVKA_UPSTREAM_CAMERA_STARTUP_GRACE_US` | upstream A/V timing override used by test contracts and server startup grace handling |
| `LESAVKA_UPSTREAM_REANCHOR_LATE_MS` | upstream A/V timing override |
| `LESAVKA_UPSTREAM_SOURCE_LAG_CAP_MS` | upstream A/V timing override |
| `LESAVKA_UVC_CONTROL_READ_ONLY` | UVC helper runtime override |
| `LESAVKA_UVC_FRAME_PATH` | UVC helper MJPEG frame spool path |
| `LESAVKA_UVC_LOCK_PATH` | UVC helper singleton lock path |
| `LESAVKA_UVC_MJPEG_IO_MODE` | UVC helper MJPEG streaming mode override |
| `LESAVKA_UVC_MJPEG_SPOOL` | UVC helper MJPEG spool toggle |
| `LESAVKA_UVC_SESSION_CLOCK_ALIGN` | UVC helper timing override |
